Product Description
Product Specifications
| APP Control (No Remote) | 1. Download the official “Lepro” app (Not work with Smart Life/Tuya apps) 2. Register via email or quick social login (Facebook/Google supported) |
| Connect to WiFi (2.4 GHz only) | Access to all app features. You need to connect to Wi-Fi before pairing with Alexa. Please place the controller in an area with a strong Wi-Fi signal (If your phone can’t get Wi-Fi where the controller is, the lights won’t connect WiFi either) |
| Connect to Bluetooth | Access to most app features (except Alexa connectivity). Bluetooth control distance: approximately 5m / 16.5ft |
| Smart Home Integration | Works with Alexa and Google Assistant. (Does not support IFTTT, HomeKit, or Matter.) Please note that the phrases Alexa can recognize are limited. For example, there is no utterance for adjusting brightness and color simultaneously as per the official Alexa guide. |
| WLED Compatible | Each node has dual WS2811 ICs (one for RGB, one for white). The commercial-grade IC design allows seamless integration with WLED software. Note: Original adapter outputs 29V (lights accept 24V-30V). WLED setup requires separate 24V controller and power supply |
| Weatherproof | The light kits, in-line controller, wires, and connections are waterproof. The adapter is not waterproof, so ensure it is plugged into an outlet with an enclosed electrical box |
| Package List (NO Remote) | 2 strings (25ft each, 15 nodes/string, 30 nodes total), 1 extension cable (3m/10ft), 1 in-line controller & power adapter, 40 pcs 3M tapes (30 pre-applied + 10 extra), 30 screws & anchors |
| Wire Length | 3.5m / 11.5ft (from the adapter plug to the first light string, including the in-line controller wire length) |
| Extension Cable | 1 × 3m/10ft |
| In-line On/Off Controller | It will remember the pattern you set on the app. The controllers for these 3 light sets (50ft, 100ft, 150ft) cannot be used interchangeably, as their programs are different. Each has its own maximum connection limit. Currently, it’s not possible to control two sets of lights with one controller. You can use the group function in the app for basic control over two sets (e.g., turning them on/off at the same time or setting the same color). |
| Cut and Splice | Current firmware doesn’t support cutting. If cut (e.g. 90 to 80 lights), app may miscount as 75 lights, and the last 5 lights of 80 will not light up. However you can splice the cutoff string with Lepro splice kit and extention cable (search on amazon) for custom installation |
| Extend the Length | For 50ft (30 lights, 24W) and 100ft (60 lights, 36W) sets, you can add one extra string (e.g., extend 30 lights to 45, or 60 to 75). Search “lepro 25 ft permanent outdoor lights single strand” on amazon |
| Power Adapter (Not Waterproof) | Input: 100-240V AC, Output: 29V DC, 0.82 A. Lights working voltage: 24-29V DC |
| Lights Spacing | 50cm / 20 inches |
| Upgraded 5-in-1 LED | RGB+IC LED Lights and tunable white LED Lights (choose any shade of white lighting, from incandescent-like 2200K warm white light to 6500K cool white light) |
| Brightness (Dimmable) | 40 lm for Warm/Cool White Light; 20 lm for RGB Light. Dimmable with app control |
Download APP, APP Setup & Navigation, Product Test
The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked.
hero-video
Merchant Video
Before Setup
1. Install Lepro APP (no remote, not compatible with Smart Life/Tuya APP)
2. Replug/redetect the light length in the app when adding more strings
3. Use 2.4 GHz Wi-Fi (not 5 GHz). If your phone can’t get Wi-Fi where the controller is, the lights won’t connect WiFi either